<menu id="6qmsk"><tt id="6qmsk"></tt></menu>
  • <xmp id="6qmsk">
    <xmp id="6qmsk">
    <menu id="6qmsk"></menu>
  • <menu id="6qmsk"><strong id="6qmsk"></strong></menu>
    <menu id="6qmsk"><tt id="6qmsk"></tt></menu>
    Chinese English

    jnclbc@163.com

    TECHNICAL ARTICLE

    Advantages and operation requirements of anti-corrosion magnetic pump

    Time:2021/10/24 18:12:45 Category:TECHNICAL ARTICLE Source: Click:

    Advantages of anti-corrosion magnetic pump

    Because the transmission shaft does not need to penetrate the pump housing, but uses the thin-wall driving torque of the magnetic field through the air gap and the isolation sleeve to drive the inner rotor, so as to eliminate the leakage channel shaft seal and realize complete sealing.

    In addition to the high requirements for magnetic materials and magnetic circuit design, other technical requirements are not high

    The maintenance and repair workload of anti-corrosion magnetic pump is very small.

    Operation requirements of anti-corrosion magnetic pump:

    Under normal working conditions, the anti-corrosion magnetic pump has no aging and demagnetization with the passage of time. However, demagnetization occurs when the pump is overloaded or the operating temperature is higher than the allowable temperature of the magnet. Therefore, the anti-corrosion magnetic pump must operate under normal operating conditions.

    anti-corrosion magnetic pump

    It is forbidden to idle the anti-corrosion magnetic pump to avoid burning out the sliding bearing and isolation sleeve. The medium transported by the anti-corrosion magnetic pump shall not contain ferromagnetic impurities and hard impurities. The anti-corrosion magnetic pump is not allowed to operate below 30% of the rated flow.

    The anti-corrosion magnetic pump does not need any maintenance method, but always check whether the current temperature rise and outlet pressure are normal, whether the leakage operation is stable, and whether the vibration and noise are normal. Generally, it is recommended to check every 2 to 3 months. If necessary, you can check at any time and deal with any abnormal situation in time.

    This article is reprinted on the Internet for the purpose of transmitting more information. If copyright issues are involved, please contact us in time, and we will cooperate to delete it; Our company specializes in producing high temperature magnetic drive pump,high pressure magnetic drive pump,high temperature and high pressure magnetic drive pump,high pressure magnetic vortex pump,high temperature and high pressure insulation magnetic drive pump, heavy stainless steel magnetic drive pump, etc.

    ? Copyright 2002 - 2021 | Shanghai lingnai special magnetic pump Co., Ltd. | All Rights Reserved Sitemap ICP:2021024032-2 Design By CNPV
    aaa毛片在线,夫の上司に犯新沢平兰,免费观看一级特黄中国生活片
    <menu id="6qmsk"><tt id="6qmsk"></tt></menu>
  • <xmp id="6qmsk">
    <xmp id="6qmsk">
    <menu id="6qmsk"></menu>
  • <menu id="6qmsk"><strong id="6qmsk"></strong></menu>
    <menu id="6qmsk"><tt id="6qmsk"></tt></menu>